For other software drivers, see Driver (software). Setup.This article is about device drivers for hardware. You can solve this by either rebuilding OpenCore with a lower spoof level, or running the installer from Drivers/Apple/BootCamp.msi. If you built OpenCore with Moderate or higher SMBIOS spoofing, you'll get an error when trying to install Boot Camp drivers. Troubleshooting "This version of Boot Camp is not intended for this computer model." This can be downloaded from the BootCamp Assistant app in macOS, or with brigadier in Windows. Booting through OpenCore ensures Windows uses UEFI.įrom there, install Windows as normal and you'll get a new BootCamp entry in OpenCore's picker when done! Don't forget to run BootCamp's utilities installer as well to ensure Wi-Fi and other important features are functioning correctly. Note: Do not boot the installer outside of OpenCore as this will default back to the old MBR BIOS setup.Once done, lets reboot into OpenCore's Menu and you'll see a new Windows' entry: Ensure that these folders and files are in the root of the USB drive, otherwise the USB will not boot.Once finished, the root of the USB drive should look as follows: Wimlib-imagex split /Volumes/CCCOMA_X64/sources/install.wim /Volumes/W10USB/sources/install.swm 4000Ĭommand will take some time, so sit back and get some coffee. # Use wimlib to split the install.wim file into a size that fits Rsync -vha -P -exclude=sources/install.wim /Volumes/CCCOMA_X64/ /Volumes/W10USB # Copy everything but the install.wim file Then open terminal and run rsync on the USB drive (replace CCCOMA_X64 with the mounted ISO's name, as well as replacing W10USB with your USB drive's name): Download Windows 10 Disc Image (ISO File).Note 2: We recommend uninstalling OpenCore from the ESP/EFI Partition when you create this new OpenCore partition to avoid confusion when selecting OpenCore builds in the Mac's boot picker.įirst up, lets grab Windows's Installer at the below link:.Note 1: For machines with dedicated drives for Windows, having different partitions for OpenCore is not required.You will next want to install OpenCore onto the new partition, either moving from the ESP with MountEFI or rerunning the OpenCore-Patcher.app Recommended size is 200MB and the partition format must be FAT32 for OpenCore to operate correctly. This lets Windows have the ESP to itself and OpenCore can stay within it's own bubble. If you plan to use the same hard drive for macOS and Windows, we recommend creating a dedicated partition just for OpenCore. Next, grab the drive you wish to install Windows on and partition it as ExFat (If formatting the entire drive, ensure it's using the GUID Partition Table scheme): Open Disk Utility in macOS and format the USB Drive as ExFat with the Master Boot Record scheme: A minimum of 30GB of free space on whichever drive you want to install Windows toįirst, let's format our drives with the following steps: USB Drive Formatting.An 8GB USB drive for the Windows Installer.Newer models than listed here will already natively support UEFI Windows through Boot Camp.įor MacPro4,1/5,1 and Xserve3,1 users, please be aware that Windows has troubles with automatic installation, so please refer to cdf's guide on manual installation:.Once you know if your model is supported, you're good to go with the rest of this guide. Note: UEFI Windows is generally quite usable for Arrandale and newer models, however machines with Penryn CPUs may experience issues.Here we'll be going step by step in the process, including partitioning and such. To install a UEFI copy of Windows is actually super simple! All it requires is to boot Windows' Installer through OpenCore to force a UEFI setup. Guide based off of cdf's Mac Pro Thread.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |